LAFCPUG: Exporting and Importing FAQs
From FAQwiki
How do I get timecode burn-in?
Q. How do I get timecode burn-in on my FCP exports
From Jude Cotter
Either :
- 1. Nest your entire timeline in a new timeline, then apply a 'Timecode Reader' or 'Timecode Generator' filter to the nest, depending on your needs.
or
- 2. You can use a small free program called QTSync available here : [www.qtsync.com].
If using this method, your end user will need to know the start timecode of the quicktime you send.
or
From Nick Meyers
- 3. Create an ordinary FCP Text object in the Viewer (CONTROL-X). Go into the Controls tab and erase the words "Sample Text". Now put the Text object into your timeline and apply Timecode Reader to it. The Text object now acts like a layer for the timecode burn. When you don't want it, just select it and press CONTROL-B (Clip Disable). When you want it back, select and press CONTROL-B to enable it again. This saves the nesting step.
Like all generators in FCP, the basic text generator has a default length of 2mins & 10 seconds. (think that's right). To change it simply go to it's duration field (top left, or hit TAB after opening it to go straight there) and type in the duration you want.
Tip: You can option-drag values between the timecode fields in FCPs viewer, canvas, and Log & Capture widow. In this case you could hold option, drag the TC from the duration field of the canvas (assuming no in/outs in the timeline) and drop it into into the duration field of the viewer. The text overlay will now have exactly the right duration for the sequence.
From Derek Mok
If you are using Modify - Timecode on the Text clip you must enter the entire timecode including 00s at the beginning, and must choose Source TC.
If Timecode Reader is already on the clip, Modify - Timecode will NOT update the filter. The timecode on the filter will continue to start at 01:00:00:00; it will not update to your modified timecode. If you cut the filter and paste it right back in, the numbers will be updated.
Also view the Quicktime movie over at Ripple Training:
How do I export to WMV?
From Jude Cotter
A. Programs such as 'Flip4Mac' are useful for converting projects to WMV. You can trial and buy Flip4Mac here :
Also worth a look are 'VisualHub'
and 'Episode Pro from Telestream' which has univeral binaries (for Intel based Macs)
The free demonstation version of Flip4Mac will only encode half of your project. If you find that about half of your media is missing from your WMVs, you need to upgrade to a paid version of Flip4Mac.
From Loren Miller
AutoDesk Cleaner 6.5 allows conversion of files to Windows Media up to WMV 7.
Find it here : Autodesk Cleaner
From Craig Seeman
Squeeze now comes with very basic WMV capabilities (1 pass presets only) which can be expanded with Flip4Mac.
Cleaner does WMV7 but can do WMV9 with Flip4Mac
Compressor, FCP, iMovie, QuicktimePro also work with Flip4Mac
Visual Hub I believe does WMV8 and also is very inexpensive.
How do I export still images?
Q. How do I export still images from FCP?
From Andrew Balis
If possible, use an external (NTSC) to view the frame you'd like to export. If the external monitor shows a "jittery" frame, you know its not the best choice. If you don't have an external monitor, then set the canvas in FCP to 100% which will show you both fields, and you'll be able to see the "jaggies" on the bad interlaced frames.
With the playhead parked over the frame to export, choose File > Export > Using QuickTime Conversion. Set to 'Still Image', click on the 'Options' button, and choose the file format of choice.
If your export has to come from one of these "bad" frames, don't de-interlace first in FCP. Export the still and use the de-interlace filter in Photoshop. Also, if working with standard def footage, the exported still will look "wide". To compensate, go to Image > Image Size. Change the horizontal proportions to 90% of original (make sure contrain proportions is turned off in the window).
or
From Nick Meyers
- Make a new bin.
- Put your stil image source sequence in the bin.
- Go through the sequence, stopping on each frame you want.
- Matchframe by pressing 'f'.
- Mark an in point.
- Create a Subclip (a new subclip appears in the new bin)
- Re-name to taste.
- Collect all the new subclips.
- Batch export (File Menu > Batch Export)
- Now do all the stills at once.
This article looks old, but batch export hasn't changed: Fun With Batch Exporting
Greg Kozikowski adds
When you set the canvas in FCP to 100% to show both fields, it is also required that you pull your Canvas frame larger and larger until there is gray all around the picture. If you don't do that, you're still only watching one field.
For more information - check out Greg's Miller Checkerboard Motion Test
Michael Horton adds:
Here is a nifty video tutorial on how to export a still image and bring it into Photoshop for clean up:
Exporting Still Images in Final Cut Pro
How can I compress for the Web?
Q. How do I make my export small enough for the internet?
From Jude Cotter
This answer is provided in the interest of helping people who have no idea what to do to get a clip out to the Web at a reasonable size and quality. It can not and does not come anywhere near close to giving the definitive answer for compression, as this is an entirely variable artform, based on dozens of different factors. But, you never know, this might work for you. Give it a shot.
Out of FCP, choose the section you want to export on the timeline using in an out, if required. Then go to File > Export > Using Quicktime Conversion. Then at the bottom of this window choose Format : Quicktime movie and click the 'options' button.
- In the next window that pops up click on 'settings'. Another popup - choose
- Compressions type : H.264.
- Frame rate : You can set this to 10 or 15 if you need it to be really small, but set to 'current' is good if you need the motion to look good. Ignore keyframes for now.
- Data rate : Automatic. You can restrict it if you need to. I never do.
- Compressor quality : You can view what your picture will look like in the preview box and choose the compressor quality you like. Often there's not a lot of difference between best, high and medium, and lower compression quality does reduce your file size.
- Click OK.
Then back in your Movie settings window, choose the 'size' button. In this box, choose Dimensions > Custom. Then figure out the size of your clip. In PAL they might be something like 720 x 576, or widescreen at 1024 x 576.
Then divide these numbers by two, or three, depending on your needs, and put those numbers in the custom boxes. So, for example - 1024 x 576 divided by 3 = 341 x 192.
- Click OK.
If you're not using sound uncheck the 'Sound' box in the 'Movie settings' section - this saves space too. If you are using sound you will need to experiment with different settings based on the quality you need it to be. Sometimes you can get down as low as 11.025 kHz, mono and still have adequate sound.
Check 'Prepare for internet streaming', as this makes the movie start playing while it's still loading.
And that's it, really. Please note that H.264 will only play on computers that have Quicktime 7 installed. Since the iPod, iTunes has a fairly deep penetration into the market, and lots of macs and pc are now running quicktime 7 because of this, but there will be some people who will not be. If this is the case for you or your client, you will need to use a different codec.
Also
If you would like information on how to upload video for YouTube, read this Uploading your movies for YouTube
And
A nice tutorial link from Michael Rouse: Exporting Video for the Web
Finally
If you're going to be doing a lot of this, think about getting this Simple Encoding Recipes For The Web
Compressor 2 : NTSC and PAL conversion.
Q. How do I convert PAL to NTSC or NTSC to PAL using Compressor 2?
From Jude Cotter
There's a great tutorial on this workflow here
Compressor 2 NTSC/PAL conversion
Why does my 16:9 export display as 4:3 in Quicktime?
Q. When I export a 16:9 Quicktime out of FCP it displays incorrectly as 4:3. How can I fix this?
Here's an explanation and workaround from Apple.
DV Widescreen export out of FCP
How do I use XML to open my project in an earlier version of FCP?
Q. How do I use XML to open my project in an earlier version of FCP?
From Nick Meyers
- Final Cut Pro projects are not backwards compatible.
- You can't open an FCP6 project in FCP5, for instance.
- You CAN open an FCP5 project in FCP6, but it will permanently modified in the process, and then wont open in FCP5.
So what to do?
Export As XML!
With Export as XML, you can export an entire project, just one clip, or anything in between: a bin of clips, an individual sequence or whatever. (You will see a summary of your selection in the Export XML window)
You can then open the XML document in an earlier version of FCP. IMPORTANT: Each new version of FCP includes a newly updated version of the XML protocol. You need to choose the version of XML you chose according to the version of FCP you want it to open in. (List follows below)
EXPORT
- 1. select your items
- 2. File Menu > Export > XML (or right click on the selection and Export > XML)
- 3. Select your XML version
IMPORT
- 1. Double Click on the XML file
OR
- 2. Import > XML (or right click in the browser and Import > XML)
- 3. Choose if you want to import the XML into your current project, or create a new one.
That's the basics, and you can get a tutorial with PICTURES here:
[www.lafcpug.org]
or read the FCP Manual
XML / FCP version Compatibility
- Use XML version 1 for going to Final Cut Pro 4.1
- Use XML version 2 for going to Final Cut Pro 5.0
- Use XML version 3 for going to Final Cut Pro 5.1.2
- Use XML version 4 for going to Final Cut Pro 6
• If in doubt, make more than one version.
• If you are taking this to an On-Line, or other post house, talk to them first.
• It should be noted that features that aren't available in your target version of FCP wont show up. for example you can't export an XML of a multiclip sequence, and expect to see multiclips in FCP4.5!
Andreas Kiel, XML guru adds:
- XML works fine with "simple" projects, but one may get in trouble with more complicated ones.
- Using XML for version round trips (constant going back & forth between FCP versions) may loose some information due to the changing nature of the XML implementation in different FCP versions
- Also it needs to be clear that the "plugin" setup has to be exactly the same on both machines otherwise filters or generators might be replaced or clips might be ignored.
- Keep an eye on new features of each FCP version:
They may make their way into a lower version XML, but the elder version of FCP can't read it and may silently just ignore those clips or show errors which might not show a hint to the real error.
- Also keep an eye on linked multi-mono audio files.
Even though there is not so much difference in the XML handling, different versions of FCP do parse them their own way - they might cause some strange errors (FCP 5 can't import them).
- Once more with feeling: for XML back always keep the project simple.
How do I get my sound out to a CD?
Q. How do I get sound out of FCP into a file I can burn a CD with? and How do I burn a CD with this file so that I can play it on a stand-alone CD player?
There's a nice tutorial by Scott Taylor on this here :
How do I upload my Movie to YouTube with Maximum Quality?
Q. How do I upload my Movies for YouTube with maximum quality?
"What people tend to forget is that you are sending YouTube a master for them to compress, therefore send the highest quality you can, that fits with their limitations."
There are a three tutorials you should read that will help you achieve maximum quality before sending your movie to YouTube for further compression.
Uploading Movies for YouTube with maximum quality.
by Philip Hodgetts
Encoding for YouTube Using Compressor
By Brian Gary
You Tube Encoding Locked and Reloaded
by Brian Gary
Which XML version should I use?
Q. I need to export an XML to send to another computer that uses an earlier version of FCP. Which version should I use?
From Nick Meyers
- Use XML version 1 for going to Final Cut Pro 4.1
- Use XML version 2 for going to Final Cut Pro 5.0
- Use XML version 3 for going to Final Cut Pro 5.1.2
- Use XML version 4 for going to Final Cut Pro 6
